فروشگاه در حال بروزرسانی است و امکان خرید فراهم نیست
00 ساعت
00 دقیقه
00 ثانیه

جستجو

سبد خرید

سبد خرید خالی است.

xs

ماژول وای فای ESP8266 ESP-01S

دسته بندی : برد های خانواده ESP
معرفی ماژول ESP8266 ESP-01S یکی از پرکاربردترین ماژول‌های Wi-Fi در حوزه اینترنت اشیاء (IoT) است که با بهره‌گیری از تراشه قدرتمند ESP8266، امکان اتصال سریع و پایدار به شبکه‌های بی‌سیم را فراهم می‌کند. این ماژول از طریق رابط UART به میکروکنترلر متصل شده و با پشتیبانی از AT Command و پروتکل TCP/IP، ارتباط مستقیم با اینترنت یا شبکه محلی را بدون نیاز به تجهیزات جانبی ممکن می‌سازد.   مشخصات
  • ولتاژ کاری: 3.3 ولت (DC)
  • رابط ارتباطی با میکروکنترلر: UART (سریال)
  • استانداردهای Wi-Fi پشتیبانی‌شده: 802.11 b/g/n
  • پشتیبانی از حالت‌های Station، Soft-AP و هم‌زمان (AP+STA)
  • پشتیبانی از پروتکل TCP/IP
  • دارای آنتن PCB روبردی
  • تعداد پایه‌های GPIO: دو عدد قابل برنامه‌ریزی
  • توان خروجی RF در حالت 802.11b: حدود 19.5dBm
  • جریان مصرفی در حالت Power Down: کمتر از 10 میکروآمپر
  • پردازنده داخلی 32 بیتی RISC با قابلیت استفاده به‌عنوان MCU مستقل
  • واسط‌های ارتباطی داخلی: UART، SPI، SDIO 2.0
  • مصرف توان در حالت آماده‌به‌کار: کمتر از 1.0 میلی‌وات (DTIM3)
  • پشتیبانی از الگوریتم‌های رمزنگاری WEP، TKIP، AES و WAPI

Introduction

The ESP8266 ESP-01 module is one of the most widely used Wi-Fi modules in the field of the Internet of Things (IoT). Powered by the high-performance ESP8266 chipset, it provides fast and stable wireless network connectivity.
This module communicates with a microcontroller via the UART interface and, with support for AT commands and the TCP/IP protocol, enables direct connection to the internet or a local network without the need for additional external hardware.

Specification

Operating Voltage: 3.3V DC

Microcontroller Interface: UART (Serial)

Supported Wi-Fi Standards: IEEE 802.11 b/g/n

Wi-Fi Modes: Station, Soft-AP, and simultaneous AP + STA

Network Protocol Support: TCP/IP

Antenna: On-board PCB antenna

GPIO Pins: 2 programmable GPIO pins

RF Output Power (802.11b mode): Approximately 19.5 dBm

Power Consumption (Power-Down mode): Less than 10 µA

Internal Processor: 32-bit RISC CPU, can operate as a standalone MCU

Internal Communication Interfaces: UART, SPI, SDIO 2.0

Standby Power Consumption: Less than 1.0 mW (DTIM3)

Security & Encryption Support: WEP, TKIP, AES, WAPI

کد کالا : VL1-A0422
تعداد

موجود شد به من اطلاع بده

با عضویت در خبرنامه موجودی، به محض موجود شدن محصول از طریق پیامک مطلع می‌شوید.

ورود و عضویت در خبرنامه
خرید امن و آسان
تنوع گسترده قطعات
تحویل در کمترین زمان
تضمین اصالت کالا
پشتیبانی ۲۴ ساعته

توضیحات

معرفی ماژول ESP8266 ESP-01S یکی از پرکاربردترین ماژول‌های Wi-Fi در حوزه اینترنت اشیاء (IoT) است که با بهره‌گیری از تراشه قدرتمند ESP8266، امکان اتصال سریع و پایدار به شبکه‌های بی‌سیم را فراهم می‌کند. این ماژول از طریق رابط UART به میکروکنترلر متصل شده و با پشتیبانی از AT Command و پروتکل TCP/IP، ارتباط مستقیم با اینترنت یا شبکه محلی را بدون نیاز به تجهیزات جانبی ممکن می‌سازد.   مشخصات
  • ولتاژ کاری: 3.3 ولت (DC)
  • رابط ارتباطی با میکروکنترلر: UART (سریال)
  • استانداردهای Wi-Fi پشتیبانی‌شده: 802.11 b/g/n
  • پشتیبانی از حالت‌های Station، Soft-AP و هم‌زمان (AP+STA)
  • پشتیبانی از پروتکل TCP/IP
  • دارای آنتن PCB روبردی
  • تعداد پایه‌های GPIO: دو عدد قابل برنامه‌ریزی
  • توان خروجی RF در حالت 802.11b: حدود 19.5dBm
  • جریان مصرفی در حالت Power Down: کمتر از 10 میکروآمپر
  • پردازنده داخلی 32 بیتی RISC با قابلیت استفاده به‌عنوان MCU مستقل
  • واسط‌های ارتباطی داخلی: UART، SPI، SDIO 2.0
  • مصرف توان در حالت آماده‌به‌کار: کمتر از 1.0 میلی‌وات (DTIM3)
  • پشتیبانی از الگوریتم‌های رمزنگاری WEP، TKIP، AES و WAPI

Introduction

The ESP8266 ESP-01 module is one of the most widely used Wi-Fi modules in the field of the Internet of Things (IoT). Powered by the high-performance ESP8266 chipset, it provides fast and stable wireless network connectivity.
This module communicates with a microcontroller via the UART interface and, with support for AT commands and the TCP/IP protocol, enables direct connection to the internet or a local network without the need for additional external hardware.

Specification

Operating Voltage: 3.3V DC

Microcontroller Interface: UART (Serial)

Supported Wi-Fi Standards: IEEE 802.11 b/g/n

Wi-Fi Modes: Station, Soft-AP, and simultaneous AP + STA

Network Protocol Support: TCP/IP

Antenna: On-board PCB antenna

GPIO Pins: 2 programmable GPIO pins

RF Output Power (802.11b mode): Approximately 19.5 dBm

Power Consumption (Power-Down mode): Less than 10 µA

Internal Processor: 32-bit RISC CPU, can operate as a standalone MCU

Internal Communication Interfaces: UART, SPI, SDIO 2.0

Standby Power Consumption: Less than 1.0 mW (DTIM3)

Security & Encryption Support: WEP, TKIP, AES, WAPI